Wednesday, May 28, 2008

How Watches Work

In addition to their exterior beauty, watches are also an incredible feat of engineering and craftsmanship. Many complicated parts must all work in tandem in order to not only tell time, but perform the myriad other functions that many of today's watches perform. This section contains an overview of the major parts of a watch, as well as an explanation of how watches operate.


Watch Parts

Watches contain many parts that work together to tell time, as well as perform other useful functions. These could include a chronograph, altimeter, alarm, day/date calendar, phases of the moon, slide-rule, etc. Here are descriptions of the major internal and external parts and their functions. For more detailed explanations, you can also visit our Watch Glossary.


Back to Top


External Watch Parts

Crystal

The cover over the watch face is called the crystal. There are three types of crystals commonly found in watches: Acrylic crystal is an inexpensive plastic that allows shallow scratches to be buffed out. Mineral crystal is composed of several elements that are heat-treated to create an unusual hardness that aids in resisting scratches. Sapphire crystal is the most expensive and durable, approximately three times harder than mineral crystals and 20 times harder than acrylic crystals. A non-reflective coating on some sport styles prevents glare.


Hands

A watch's hands are the pointing device anchored at the center and circling around the dial indicating hours, minutes, seconds and any other special features of the watch. There are many different types of hands:

  • Alpha: A hand that is slightly tapered

  • Baton: A narrow hand sometimes referred to as a "stick hand"

  • Dauphine: A wide, tapered hand with a facet at the center running the length of the hand

  • Skeleton: Cutout hands showing only the frame

  • Luminous: Hand made of skeleton form with the opening filled with a luminous material


Bezel

The surface ring on a watch that surrounds and holds the crystal in place is called the bezel. A rotating ratchet bezel moves in some sport watches as part of the timing device. If rotating bezels are bi-directional (able to move clockwise or counter clockwise), they can assist in calculations for elapsed times.

Crown

The nodule extending from the watchcase that is used to set the time, date, etc. is called the crown. Most pull out to set the time. Many water-resistant watches have crowns that screw down for a better water-tight seal.

Dial

The watch face that contains the numerals, indices or surface design is called the dial. While these parts are usually applied, some may be printed on. Sub-dials are smaller dials set into the main face of the watch. These can be used for added functions, such as elapsed times and dates.

Case (or Watchcase)

The watchcase is the metal housing that contains the internal parts of a watch. Stainless steel is the most typical metal used, but titanium, gold, silver and platinum are also used. Less expensive watches are usually made of brass that has been plated with gold or silver.

Bracelet

A bracelet is the flexible metal band consisting of assembled links, usually in the same style as the watch case. Detachable links are used to change the length of the bracelet. Bracelets can be made of stainless steel, sterling silver, gold, or a combination.

Strap

A strap is simply a watchband made of leather, plastic or fabric.

Back to Top

Internal Watch Parts

A watch's main timekeeping mechanism is called its movement. Today's watch movements fall into two categories: Automatic mechanical or quartz. Automatic mechanical movements mark the passage of time by a series of gear mechanisms. Most automatic movements are wound by the normal, everyday movement of your wrist, which charges the watch's winding reserve. Quartz movements are powered by a battery and do not stop working once removed from your wrist.

Balance Wheel

The regulating organ of a watch with a mechanical movement that vibrates on a spiral hairspring is called the balance wheel. Lengthening or shortening the balance spring makes the balance wheel go faster or slower to advance or retard the watch. The travel of the balance wheel from one extreme to the other and back again is called oscillation.

Gear Train

This series of small gears in both quartz and mechanical movement watches is responsible for transmitting the power from the battery (in a quartz watch) or spring (in a mechanical watch) to the escapement, which distributes the impulses that mark the time.

Escapement

This part of the watch restricts the electrical or mechanical impulses of the gear train, metering out the passage of time into equal, regular parts.

Motion Work

The motion work is a series of parts inside a watch that receive power from the escapement and gear train, which distribute and generate the watch's power. The motion work is responsible for actually turning the watch's hands.

Mainspring

The mainspring is the energy source responsible for powering the watch movement (as opposed to a battery in a watch with a quartz crystal movement). The spring is wound, either manually (using the winding stem) or automatically, by the motion of the wearer's wrist. Potential energy is stored in the coiled spring, then released to the gear train which transmits the power to the escapement and motion work, which turns the hands on the watch dial.


Back to Top


How a Watch Works

Watches essentially tell time by the integration of three main components: an energy source, a time regulating mechanism and a display. The energy source can be electronic (as in a battery) or mechanical (as in a wound spring). A watch's main timekeeping mechanism is called its movement. Today's watches fall into two categories: Mechanical movements and Quartz movements. Here's a breakdown of how each type of movement works:


Back to Top

Mechanical (Automatic) Watches

Mechanical watches are made up of about 130 parts that work together to tell time. Automatic mechanical movements mark the passage of time by a series of gear mechanisms, and are wound by the movement of your wrist as you wear it. The gear train then transmits the power to the escapement, which distributes the impulses, turning the balance wheel. The balance wheel is the time regulating organ of a mechanical watch, which vibrates on a spiral hairspring. Lengthening or shortening the balance spring makes the balance wheel go faster or slower to advance or retard the watch. The travel of the balance wheel from one extreme to the other and back again is called oscillation. A series of gears, called the motion work, then turns the hands on the watch face, or dial. See illustration below.

Back to Top

Quartz Crystal Watches

Glossary of Watch Terms

These words are used frequently in watch lingo. Refer to the following definitions if you have any questions about technical specifications or terms. We are also very happy to discuss these terms or any other questions you may have about shopping for watches. Please call 1-866-377-3034.




ABCDEFGHI JKLMN OPQRSTUV WX YZ




12-Hour Recorder (or Register):


A subdial on a chronograph that can record time periods of up to 12 hours.


30-Minute Recorder (or Register):

A subdial on a chronograph (see "chronograph") that can time periods up to 30 minutes.


Back to Top


A

Accuracy:

Refers to rate constancy of a watch, not only on whether it is showing the exact time. A watch gaining or loosing exactly the same amount every day is considered accurate.


Acrylic

Crystal:


Sometimes referred to as Hesolite, an acrylic crystal is composed of plastic composite that is generally less expensive and less durable than a sapphire or a mineral crystal. Benefits of an acrylic crystal are that it flexes rather than shatters on impact. It also produces little glare under bright light and can be polished easily.


Alarm:

A device that makes a sound at a preset time. There are both quartz and mechanical alarm watches.


Altimeter:

Function that provides altitude by responding to changes in barometric pressure, commonly found in pilot watches. Inside a pressurized airplane cabin, the altimeter registers as if on land.


Analog Watch:

A watch with a dial, hands, and numbers or markers that present a total display of 12-hours.


Analog-Digital Display:

A watch that shows the time by means of hands (analog display) as well as by numbers (a digital display). The analog display has a traditional dial with hour, minute and sometimes second hands. The digital display shows the time numerically with a liquid crystal display. This feature is usually found on sport watches.


Annual Calendar:

A watch showing the day, date month and 24 hours, adjusting automatically for short and long months. The calendar needs setting only once a year - at the end of February to the 1st of March.


Aperture:

Small opening. The dials of some watches (in French: montres ?� guichet) have apertures in which certain indications are provided (e.g. the date, the hour, etc).


Atmosphere (Atm):

Unit of pressure used in watch making to indicate water resistance.


Atomic Time Standard:

Provided by the U.S. National Institute of Standards and Technology, Time and Frequency Division,

Boulder,
Colorado, atomic time is measured through vibrations of atoms in a metal isotope that resembles mercury. The result is extremely accurate time that can be measured on instruments. Radio waves transmit this exact time throughout
North America and some 'atomic' watches can receive them and correct to the exact time. To synchronize your watch with atomic standard time, call (303) 499-7111.


Automatic Movement / Automatic Winding (also called self-winding):

A mechanically powered watch that is wound by the motion of the wearer's arm rather than through turning the winding stem (manual mechanical). In response to this motion, a rotor turns and winds the watch's mainspring. Most automatic watches have up to 36 hours of power reserve. If an automatic watch is not worn for a day or two, it will wind down and need to be wound by hand to get it started again..


Back to Top


B

Band:

A vague, generic term used to refer to the band that holds a watch on your wrist. The preferred terms bracelet and strap, clearly describe the two major types.


Battery EOL:


Battery End Of Life indicator. This function forewarns of impending battery failure in a quartz watch by means of the second hand jumping in two or sometimes four-second intervals. The wearer usually has approximately two weeks before battery failure.



Battery Life:

The period of time that a battery will continue to provide power to run the watch. Life begins at the point when the factory initially installs the battery in the watch.



Battery:

A device that converts chemical energy into electricity. Most watch batteries are the silver oxide type, delivering 1.5 volts. Much longer-lasting lithium batteries deliver 3 volts.



Battery-less Quartz:

Also known under various marketing names, including Kinetic (Seiko), Omega-matic (Omega), and Auto quartz (Invicta). Terms for the modern hybrid watch technology of using a quartz movement powered by a small electric current generator operated by a rotor. Electricity generated from the rotor's movement is stored in a capacitor, rechargeable battery, or similar means to keep the watch running. So, like an automatic watch, these also must be worn regularly to keep up their electrical power reserve.


Bezel:

Generically, the upper part of the watch body. Specifically, it usually refers to a ring around the outside of the crystal. On jewelry watches, the bezel may contain a ring of diamonds. On sports watches, the bezel may have calibrated markings and the ability to rotate in one or two directions.


Bidirectional Rotating Bezel:

A bezel that can be moved either clockwise or counterclockwise. These are used for mathematical calculations or for keeping track of elapsed time.


Bracelet:

A bracelet is the flexible metal band consisting of assembled links, usually in the same style as the watchcase. Detachable links change the length of the bracelet. Bracelets can be made of stainless steel, sterling silver, gold, or a combination. See also strap.


Back to Top




C

Cabochon:

Used to indicate a smooth round or oval convex shaped polished gemstone. In watch terminology, it describes a decorative stone set in the watch crown.


Calendar:

The calendar mechanism or function on a watch can consist of a date only showing in a window through to a triple calendar, showing the date, day and month. A combination of dial cut outs and pointer hands may be used. The most complicated calendar mechanisms may be mechanically programmed to show the year and months including those with less that 31 days; leap years can also be mechanically allowed for. Sometimes referred to as a perpetual calendar.


Case or Watchcase:

The metal housing that contains the internal parts of a watch. Stainless steel is the most typical metal used, but titanium, gold, silver and platinum can also be used.


Chronograph Rattrapante:

The addition of a flyback hand (rattrapante) significantly increases the potential uses for chronographs. It makes possible the measurement of split second times or timing simultaneous events of unequal duration.


Chronograph:

A multifunction sport watch with a stopwatch function. Most have two or three subdials, or minidials, for measuring minutes and hours. When used in conjunction with specialized scales on the watch dial it can perform many different functions, such as determining speed or distance ( see "tachometer" and "telemeter"). Some can time more than one event at a time (see "flyback hand" and "split seconds hand"). Do not confuse with "chronometer" which is a timepiece that has met certain high standards of accuracy set by an official watch

institute of
Switzerland.


Chronometer:

This term refers to a precision watch that is tested in various temperatures and positions, thus meeting the accuracy standards set by C.O.S.C. in

Switzerland. These watches are provided with a chronometer certifcate detailing specific test results by the C.O.S.C.


Clasp:

The attachment used to connect the two ends of the watch bracelet around the wrist.


C.O.S.C.:

Control Officile Suisse de Chronometers or Swiss Controle Officiel des Cronometres- the independent Swiss regulatory organization that rigorously tests and certifies (or fails) watch movements for chronometer status.


Countdown Timer:

A function that lets the wearer keep track of how much of a preset period of time has elapsed. Some countdown timers sound a warning signal a few seconds before the time runs out. These are useful in events such as yacht races, where the sailor must maneuver the boat into position before the start of a race.


Crown:

The crown often referred to as the winding crown or winder is used for winding the watch in the case of a non-automatic, for setting the hands to the correct time and often for setting the date in the case of calendar equipped watches. On diving/sports models, the crown may be screw-down whereby it screws onto a threaded tube, which protrudes from the case of the watch. This often ensures superior water resistance.




Crystal:

The cover over the watch dial is called the crystal. There are three types of crystals commonly used in watches: acrylic crystal is an inexpensive plastic that allows shallow scratches to be buffed out. Mineral crystal is composed of several elements that are heat-treated to create an unusual hardness that aids in resisting scratches. Sapphire crystal is the most expensive and durable, approximately three times harder than mineral crystals and 20 times harder than acrylic crystals. A non-reflective coating on some sport styles prevents glare.


Crystal Skeleton Caseback:

Caseback made of transparent material such as hardened mineral crystal or sapphire crystal that reveals the intricate movement of the watch.


Cyclops (Magnified Window):

A small window or lens in the crystal that is added to magnify the date 2 1/2 times.


Back to Top


D

Day/Date Watch:

A watch that indicates not only the date but also the day of the week.


Deployment Buckle (Foldover):

A three-folding enclosure that secures the two ends of the bracelet and allows enough room for placing the watch on the wrist when fully deployed. When closed, the buckle covers the two-piece folding mechanism.


Depth Alarm:

An alarm on a diver's watch that sounds when the wearer exceeds a preset depth. In most watches it stops sounding when the diver ascends above that depth.


Depth Sensor/Depth Meter:

A device on a diver's watch that determines the wearer's depth by measuring water pressure. It shows the depth either by analog hands and a scale on the watch dial or through a digital display.


Dial:

The dial, often referred to as the face is usually marked with numbers or batons to which the hands point in order for the wearer to tell the correct time. Dials may be minimalist with no markers at all or extremely complex as in the case of pilots' chronographs. Dials may be decorated with patterns or in some cases with precious stones.


Digital:

The display of time in numbers instead of hands on the dial. The numbers can appear in an LCD (Liquid Crystal Display), which shows a continuous reading or an LED (Light-Emitting Diode), which shows the time at the push of a button.


Display:

Indication of time or other data, either by means of hands moving over a dial (analog display) or by means of numerals appearing in one or more windows (digital or numerical display); these numerals may be completed by alphabetical indications (alphanumerical display) or by signs of any other kind. Example: 12.05 MO 12.3 = 12 hours, 5 minutes, Monday 12th March. Such displays can be obtained by mechanical or electronic means.


Diver's Watch:

Divers' watches traditionally feature a graduated, rotating bezel, screw down winding crown, and caseback... must be water resistant to at least 200m or 660 feet.


Dual Time/Second Time Zone Bezel:

A rotating bezel, which can be used to display a separate time zone distinct from that shown on the dial.


Dual Time:

A watch that measures current local time as well as at least one other time zone. The additional time element may come from a twin dial, extra hand, subdial, or other means.


Back to Top


E

Elapsed Time Rotating Bezel:

A graduated rotating bezel (see "rotating bezel") used to keep track of periods of time. The bezel can be turned so the wearer can align the zero on the bezel with the watch's seconds or minutes hand. You can then read the elapsed time off of the bezel. This saves from having to perform the subtraction that would be necessary if you used the watch's regular dial.


Elapsed Time:

The actual time taken for an object to travel over a specified distance.


Engine Turning:

Decorative engraving, usually on a watch dial.


EOL:

End of Life. In quartz movement, the end of battery life is indicated by the second hand, which starts to jump every four seconds. The battery should be changed immediately.


Back to Top


F

Face:

The visible side of the watch or the dial.


Flyback:

An additional hand on a chronograph which moves with the second hand but, can be stopped independently to measure an interval which can then "fly back" to catch up with the other hand. This is useful for capturing lap times without losing the ability to capture the finish time.


Foldover Buckle (Deployment):

A three-folding enclosure that secures the two ends of the bracelet and allows enough room for placing the watch on the wrist when fully deployed. When closed, the buckle covers the two-piece folding mechanism.


Back to Top


G

Gasket:

A rubber or plastic ring that seals the internal works of the watch against dust, moisture and water.


GMT Timezone:

GMT (Greenwich Mean Time), also known as Zulu Time, as set to the international clock in

Greenwich,
England, reflects, through an additional hour hand, the world time on a 24-hour scale and is used by pilots worldwide.


Gold Plating:

An application of gold over the surface of an item.


Gold, Rose Gold, Yellow Gold, and White Gold:

The only natural form of gold is yellow gold. But since gold is too soft in its pure form to make jewelry, it is normally made into an alloy by mixing it with other metals. The portion of pure gold to other metals determines the Karat rating. 24K is pure gold. 18K is 75% pure. The exact nature of the other metals used determines the color. A moderate amount of copper in the alloy creates Rose Gold. A moderate amount of palladium and nickel creates white gold.


Back to Top


H

Hand:

Indicator, usually made of a thin, light piece of metal, variable in form, which moves over a graduated dial or scale. Watches usually have three hands showing the hours, minutes and seconds.


Handwinding (Manual Mechanical):

A watch with a manual mechanical movement, which needs to be wound by the wearer using the winding crown. This winds the mainspring up which then releases its energy to power the watch.


Back to Top


J

Jewels:

The bearing, endstone or pallet used for reducing friction within the movement of a watch are made of synthetic material of precious or semi-precious stones. Usually a very inexpensive form of synthetic ruby, these are used for virtually frictionless pivots or hubs at certain critical places in the watch mechanism. These jewels do not add any monetary value to a watch. It is also important to understand that more jewels does not necessarily make a better watch.


Jump Hour Indicator:

A jump hour indicator takes the place of an hour hand. It shows the hour by means of a numeral in a window on the dial of the watch. The word "jump" refers to the fact that the numerals jump from 1 to 2 to 3, etc., rather than showing intermediate times between hours as hour hands do. The minutes and seconds in a jump hour watch are read as normal from the analog hands and dial.


Back to Top


K

Karat or K:

An indication of the purity of the metal used, expressed in the number of 1/24th of the pure metal used in the alloy. Metals such as gold are too soft in their pure state use in jewelry, so they are typically made into an alloy with other metals for strength. 24K (equal to 24/24ths) is pure metal. 18K is 18 parts pure metal mixed with 6 parts of other metals. That translates to 18/24=0.750, which is 75% pure, or 750 parts per thousand.


Kinetic:

Refers to the Seiko line of Kinetic watches. This innovative technology has a quartz movement that does not use a battery. Movement of your wrist charges a very efficient capacitor which powers the quartz movement. Once the capacitor is fully charged, men?��s models will store energy for 7-14 days without being worn. Ladies models store energy for 3-7 days. The watch alerts you to a low capacitor charge when the seconds hand starts to move in two second intervals.


Back to Top


L

Lap Memory:

The ability, in some quartz sport watches, to preserve in the watch's memory the times of laps in a race that have been determined by the lap timer (see "lap timer"). The wearer can recall these times on a digital display by pushing a button.


Lap Timer:

A chronograph function that lets the wearer time segments of a race. At the end of a lap, the wearer stops the timer, which then returns to zero to begin timing the next lap.


LCD Display (Liquid Crystal Display):

A digital watch display that shows the time electronically by means of a liquid held in a thin layer between two transparent plates. Followed from the earlier LED or Light Emitting Diode display of the first quartz digital watches. The LCD was preferred as it used vastly less power than the LED thus the time could be shown constantly as opposed to having to press a button for time display.


Lugs:

Extensions on both sides of the case where the bracelet or strap is attached.


Back to Top


M

Magnified Window (Cyclops):

A small window or lens in the crystal that is added to magnify the date 2 1/2 times.


Manual Winding:

Refers to a watch with a manual mechanical movement, which needs to be wound by the wearer using the winding crown. This winds the mainspring up which then releases its energy to power the watch.


Mechanical Movement:

A movement based on a mainspring which when wound slowly unwinds the spring in an even motion to provide accurate timekeeping. As opposed to a manual mechanical watch which needs to be wound on a consistent basis, an automatic mechanical requires no winding because of the rotor, which winds the mainspring every time you move your wrist (see our section on automatic watch maintenance for more details).


Military or 24 Hour Time:

When time is measured in 24-hour segments. To convert 12-hour time to 24-hour time, simply add 12 to any p.m. time. To convert 24-hour time to 12-hour time, subtract 12 from any time from 13 to 24.


Mineral

Crystal:


Watch crystal made from what is essentially a form of glass. More scratch resistant than acrylic, a mineral crystal will however scratch and is extremely difficult to polish.


Minute Repeater:

A Complication on a watch that can strike the time in hours, quarters, or seconds by means of a push piece.


Moon Phase:

An indicator that keeps track of the phases of the moon. A regular rotation of the moon is once around the earth every 29 days, 12 hours and 44 minutes. Once set, the moon phase indicator accurately displays the phase of the moon.


Mother-of-Pearl:

Iridescent milky interior shell of the freshwater mollusk that is sliced thin and used on watch dials. While most have a milky white luster, mother-of-pearl also comes in other colors such as silvery gray, gray blue, pink and salmon.


Movement:

The means by which a watch keeps time, often including the power source. For example, a watch with mechanical movement uses a spinning balance wheel powered by a tightly wound spring, whereas a watch with quartz movement measures the vibrations in a piece of quartz and often is powered by a battery.


Back to Top


O

O-Ring:

O-rings are used to seal the backs of watches, which feature either a press-in back or a screw on back. They ensure water resistance. Usually also used on the winding stems of watches and in the winding crowns to protect against the ingestion of water and dust. Normally made from a rubber/plastic compound.


Back to Top


P

Pedometer:

A device that counts the number of strides taken by the wearer by responding to the impact of the wearer's steps.


Perpetual Calendar:

A calendar complication that adjusts automatically to account for different lengths of the month (30 or 31 days) and leap years. Perpetual calendars, which can be powered by quartz or mechanical movements, are programmed to be accurate until the year 2100.


Platinum:

One of the most r

Watch Care & Cleaning

Water-Resistant Versus Waterproof
A watch marked as water resistant without a depth indication is designed to withstand accidental splashes of water only.

Do not submerge such a watch. Higher levels of water resistance are indicated by increasingly higher acceptable depths, usually indicated in meters.

There are a variety of ways to make a watch water resistant. All such watches use rubber gaskets or "O" rings to seal the case back. A watch with a back that screws onto the case provides a higher degree of water resistance. Some crowns (the "winding stem") actually screw into the case to further increase water resistance.

Usage Recommendations
The following usage recommendations are suggested by the Seiko Corporation of America.
Water-resistant to 30 meters (100 feet). Will withstand splashes of water or rain but should not be worn while swimming or diving. Water-tested to 50 meters (165 feet). Suitable for showering or swimming in shallow water. Water-tested to 100 meters (330 feet). Suitable for swimming and snorkeling. Water-tested to 150 meters (500 feet). Suitable for snorkeling. Water-tested to 200 meters (660 feet). Suitable for skin diving. Diver's 150 meters (500 feet). Meets ISO standards and is suitable for scuba diving. Diver's 200 meters (660 feet). Meets ISO standards and is suitable for scuba diving. Please note that we do not recommend swimming or diving with your watch unless it has a screw-down crown (also known as "screw-lock" or "screw-in" crown) and is water-resistant to at least 100 meters.

Keeping Your Watch Dry
Always make sure your watch is dry after it has been exposed to water. By taking a few minutes and thoroughly drying your watch with a lint-free cloth, you will prevent rust from forming. This is a key point in ensuring the long life of your watch.

Caring for the CrystalThe crystal is the transparent part of the watch through which you tell time. As we discussed with water, a watch may have a scratch-resistant crystal, however no crystal is truly scratchproof. Therefore, it is not advisable that you toss your watch onto the dresser or into a drawer at the end of the day. It's better for the watch to store or wrap it in a soft cloth before placing it down. The more care you take with the watch, the less scratches you will end up with. Replace broken or scratched crystals immediately. Even a hairline crack can let dust or moisture into the mechanism, threatening its accuracy. If you place the watch in a drawer with other jewelry, this too may scratch the watch, as it might rub against the other pieces. Another suggestion would be to store the watch in its original case, since these cases are generally soft and made specifically for the watch.

Metal Versus Leather Bands
If you participate in activities that cause excessive sweat or perspiration, you may want to consider getting a watch with a metal bracelet or rubber strap, instead of a leather strap. Watches that have natural and genuine leather straps will gradually deteriorate with constant exposure to perspiration. Metal bracelets would best be classified as "dress" watches.

Battery Replacement
Watches that run on batteries are known as 'Quartz' watches. The batteries will last anywhere from one to several years. How will you know when the watch needs the battery changed? Most of the watches sold by WatchesandJewels.com come with free lifetime battery replacement. Send the watch in with your receipt, and WatchesandJewels.com will replace the battery. If a watch was not purchased from WatchesandJewels.com or did not come with free lifetime battery replacement, consider taking it to a local watch professional for battery replacement.

Watches that do not need battery replacement include automatic (self-winding) watches and solar-powered watches (which have a rechargeable battery). You may want to consult the watch's manual if you're not sure what type of watch you have.

Cleaning Your Watch
The best way to clean your watch is by using a lint-free cloth and a toothpick. Use the toothpick to clean out any dirt buildup in the bracelet or casing of the watch and the cloth to wipe it clean. If it is water-resistant, give it an occasional cleaning with a mixture of warm water and a mild soap. If the strap is leather or non-metal, clean only the case.

Servicing Your Watch
Like any other piece of machinery, a watch must be cleaned, oiled, and serviced. Every couple of years, you may notice the watch losing time or running fast - or it may stop working altogether. Just take your watch to a local watch professional for servicing.

Automatic Watch Maintenance
Although automatic mechanical watches do not have batteries, some easy-to-follow maintenance is necessary for continued and long-lasting good use.

Self-winding automatic watches depend on the movement of the arm to operate and do require some winding, even if you wear your watch on a daily basis.

If you wear your Automatic watch everyday, it is best to wind it once, every two weeks to keep the wheels in motion and oil fluid. Simply wind the crown (the same knob used to adjust the time and date) until you meet slight resistance.

If you do not wear your Automatic watch everyday, you should try to wind it at least twice a week to ensure continuous operation, as well as keeping the inside mechanism in complete running order.
Try to wind your mechanical watch at the same time every day. This is extremely beneficial for the mechanism. You may want to make it a routine, winding it every morning when you wake up.

Avoid setting the day and/or date (if your watch has these functions) at night. The day-date mechanism is activated during the nighttime hours and could be disrupted if set at this time.

And, always avoid wearing your mechanical watch, if you are playing a sport requiring continuous arm motion (e.g. tennis, baseball, golf), since continuous arm motion could damage the movement.

Automatic Watch Maintenance

Although automatic mechanical watches do not have batteries, some easy-to-follow maintenance is necessary for continued and long-lasting good use.Self-winding automatic watches depend on the movement of the arm to operate and do require some winding, even if you wear your watch on a daily basis.

If you wear your Automatic watch everyday, it is best to wind it once, every two weeks to keep the wheels in motion and oil fluid. Simply wind the crown (the same knob used to adjust the time and date) until you meet slight resistance.

If you do not wear your Automatic watch everyday, you should try to wind it at least twice a week to ensure continuous operation, as well as keeping the inside mechanism in complete running order.

Try to wind your mechanical watch at the same time every day. This is extremely beneficial for the mechanism. You may want to make it a routine, winding it every morning when you wake up.

Avoid setting the day and/or date (if your watch has these functions) at night. The day-date mechanism is activated during the nighttime hours and could be disrupted if set at this time.
And, always avoid wearing your mechanical watch, if you are playing a sport requiring continuous arm motion (e.g. tennis, baseball, golf), since continuous arm motion could damage the movement.